ColorX WasteLess™ Laminator
ColorX Home
ID Card Making
ID Card Printers
The ColorX Card Laminator provides a tough protective layer of laminate over the ID card.
This laminate increases the strength of the card, protects the image printed on the card 



and extends its life by decreasing the wear to the surface of the card. An extra measure of 



security can be added by using an optical security logo or hologram images incorporated in the 



laminate. It is impossible to remove this tough layer of laminate without damaging the surface of the card.
Card Security Features
Laminate Security Features
The ColorX Card Laminator is available in two models.  In-Line Laminator model (as 



shown above) can be docked directly to the ColorX C9610 or C9611 card printer, or through 



the flipper/mag encoder.  During in-line operation, the cards are fed automatically from the card 



printer or flipper, through the laminator, and then into the output tray.  In the stand alone 



Laminator, the cards are loaded in an input card tray (100 card capacity) which can be then 



automatically laminated and fed to the output tray.
ColorX Price Sheet
Dye-Sub Card Tech
News
The ColorX Card laminator uses rolled 0.001” thick PET lamina with an adhesive 



coating on one side.  The Laminator cuts a successive sheet supplied from the lamina roll to the 



suitable length then laminates the cut sheet on the card by heating and pressing.  Because of the



accurately controlled heat and pressure supplied by the heat-roller, the ColorX Laminator has



the ability to straighten and remove curl on the card to achieve flat laminated cards.  Since there 



is no carrier for the lamination material, there is no waste and therefore the lamination is most



economical.  The extra large capacity of 740 lamina per roll reduces frequency of loading the 



rolls.
The operator control panel on the ColorX Card Laminator is easy to use. Any errors 



are indicated on the two-digit LED display making it quick to diagnose problems. The three 



indicator lights indicates at a glance when things are running smoothly. The laminator laminates 



each card in just under 30 seconds, making volume laminating fast and efficient process.
Phone: 503-539-1262 (9:00 AM to 5:00 PM  Pacific Time) Fax: 954-337-0641

ColorX Corporation  9900 SW Hall Blvd., Suite 100  Tigard, OR 97223, USA

Eail: suresh@colorx.com